Parameters |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8646 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Number of Channels |
2 |
Operating Supply Current |
4mA |
Quiescent Current |
2mA |
Supply Current-Max |
5mA |
Slew Rate |
11V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
84 dB |
Current - Input Bias |
50pA |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V |
Output Current per Channel |
120mA |
Input Offset Voltage (Vos) |
2.5mV |
Gain Bandwidth Product |
24MHz |
Unity Gain BW-Nom |
24000 kHz |
Voltage Gain |
116dB |
Average Bias Current-Max (IIB) |
0.00055μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
600μV |
Settling Time |
500 ns |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.000001μA |
Programmable Power |
NO |
Input Capacitance |
6.7pF |
Wideband |
NO |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8646WARZ-RL Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. It is estimated that there will be at least 8 terminations this year. In total, there are 8 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. There is an input offset voltage of 2.5mV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using a supply current of 4mA , this buffer op amp will be able to operate. There should be no change in the voltage gain. Buffer op amp is equipped with 2 channels on the device. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. The Automotive indicates the series number of the op amp. Linear amplifier has a quiescent current of 2mA.
AD8646WARZ-RL Features
8 Pins
supply voltage of 5V
116dB voltage gain
Output Type: Rail-to-Rail
AD8646WARZ-RL Applications
There are a lot of Analog Devices Inc. AD8646WARZ-RL Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Signal filtering
- Radiation thermometry transducers
- RF cable systems
- Integrator circuits
- Comparator
- Laptop
- Communication
- Industrial applications including automation
- Video conversion and routing