AD8659ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8659 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Number of Channels | 4 |
| Operating Supply Current | 72μA |
| Nominal Supply Current | 72μA |
| Quiescent Current | 18μA |
| Slew Rate | 0.07V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~18V ±1.35V~9V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 350μV |
| Bandwidth | 230 kHz |
| Gain Bandwidth Product | 200kHz |
| Unity Gain BW-Nom | 230 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0026μA |
| Power Supply Rejection Ratio (PSRR) | 115dB |
| Settling Time | 15 μs |
| Dual Supply Voltage | 5V |
| Input Capacitance | 3.5pF |
| Height Seated (Max) | 0.8mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8659ACPZ-R7 Overview
In the package, you will find a 16-WQFN Exposed Pad, CSP-case to contain the op amp ic. Op amps are General Purpose types of amplifier on the chip. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 16. A total of 16 pins are attached to buffer op amp. The linear amplifier should be run at 10V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 16 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 350μV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 72μA, this op amp ic can operate. It is recommended to keep the voltage gain at 120dB at all times. Op amp ic has 4 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There is an 18μA quiescent current running through op amp ic.
AD8659ACPZ-R7 Features
16 Pins
supply voltage of 10V
120dB voltage gain
Output Type: Rail-to-Rail
AD8659ACPZ-R7 Applications
There are a lot of Analog Devices Inc. AD8659ACPZ-R7 Instrumentational OP Amps applications.
- Video data acquisition
- Biopotential
- Large motor controllers
- Thermocouples
- Automatic control
- Video computer boards
- High-frequency data acquisition systems
- Portable electronic products powered by batteries
- High gain DC amplifier
- Television broadcasting equipment
