AD8672ARMZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8672 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 7mA |
| Quiescent Current | 3.5mA |
| Slew Rate | 4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 3nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 75μV |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 135.56dB |
| Average Bias Current-Max (IIB) | 0.04μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 20μV |
| Settling Time | 5.1 μs |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Input Capacitance | 6.25pF |
| Wideband | NO |
| Input Voltage Noise Density | 2.8nV/sqrt Hz |
| Height | 950μm |
| Length | 3.2mm |
| Width | 3.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8672ARMZ-REEL Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations is approaching the 8 mark. In total, there are 8 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 75μV. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 7mA, this op amp ic can operate. The voltage gain should stay at 135.56dB. 2 channels are available on the instrumentation amplifier. The instrumentation amplifier is packed in the form of TR. As a result, linear amplifier's quiescent current is 3.5mA.
AD8672ARMZ-REEL Features
8 Pins
supply voltage of 5V
135.56dB voltage gain
AD8672ARMZ-REEL Applications
There are a lot of Analog Devices Inc. AD8672ARMZ-REEL Instrumentational OP Amps applications.
- Television broadcasting equipment
- single/dual op amp sum and difference circuits
- Radiation thermometry transducers
- Differentiator circuits
- Gaming industry
- Signal amplification
- RF cable systems
- Proportional counter tubes
- Commercial audio systems
- Video amplifiers
