AD9517-3ABCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.25GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD9517 |
| Output | CMOS, LVDS, LVPECL |
| Pin Count | 48 |
| Number of Outputs | 12 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Power Supplies | 3.33.3/5V |
| Interface | Parallel, Serial |
| Number of Circuits | 1 |
| Nominal Supply Current | 20mA |
| Max Supply Current | 100μA |
| Logic Function | Clock |
| Number of Inputs | 2 |
| Input | CMOS, LVDS, LVPECL |
| Ratio - Input:Output | 1:12 |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.675 ns |
| Height | 950μm |
| Length | 7.1mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9517-3ABCPZ Overview
This clock IC is packaged using the Tray method. This clock generator is embedded in the 48-VFQFN Exposed Pad, CSP package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 48 terminations can be found in frequency synthesizer. This time clock generator should be voltaged at 3.3V. The input of this clock generator is designed to be CMOS, LVDS, LVPECL. To access the full performance of the electronic component, 1 circuits are implemented. With the Surface Mount, it is easy to install this electric component on the panel. Clock PLL is capable of receiving a maximum of 3.465V as a supply voltage. There are 3.135V~3.465V available for use with this clock PLL. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. This is a clock generator compatible with CMOS, LVDS, LVPECL logic levels. This is an electronic part that can be classified as a Clock Generator, Fanout Distribution in this case. An IC that generates clocks specifically for microprocessors, this clock PLL is 48-bits in si48e. According to the base part number AD9517, its related parts can be found. There is a 48 pin that is available on the frequency synthesizers. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. The output frequency is magnified as high as possible with 12 signal outputs. There is a low timing skew at 0.675 nsmax with this RF synthesizer. At a frequency of 2.25GHz, the system can achieve high efficiency. This frequency synthesizer operates at a maximum current of 100μA. A RF synthesizer that combines logic function Clock for clocks with input data. Here's a clock generator with 2 inputs.
AD9517-3ABCPZ Features
Available in the 48-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9517-3ABCPZ Applications
There are a lot of Analog Devices Inc. AD9517-3ABCPZ Clock Generators applications.
- Frequency shifting decodes
- Wi-Fi routers
- Cellular/4G
- Camera systems
- Antenna automatic tracking
- Test equipment
- Wide area power system
- FSK demodulators
- Televisions
- Vector network analyzers (VNA)
