Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
40-WFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
40 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tray |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
40 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution, Multiplexer |
Subcategory |
Clock Generators |
Voltage - Supply |
2.97V~3.63V |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Frequency |
125MHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
AD9572 |
Output |
CMOS, LVDS, LVPECL |
Pin Count |
40 |
Number of Outputs |
7 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Number of Elements |
2 |
Number of Circuits |
1 |
Frequency (Max) |
156.25MHz |
Input |
Crystal |
Ratio - Input:Output |
1:7 |
Primary Clock/Crystal Frequency-Nom |
25MHz |
PLL |
Yes |
Differential - Input:Output |
No/Yes |
Divider/Multiplier |
Yes/No |
Height Seated (Max) |
0.8mm |
Length |
6mm |
Width |
6mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD9572ACPZPEC Overview
As a clock IC, PLLs is packaged using the Tray method. In the 40-WFQFN Exposed Pad, CSP package, there is an embedded clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result of this, we can find 40 terminations. A voltage of 3.3V should be applied to this electronic frequency generator. Crystal is designed as this clock generator's input. To access the full performance of the electronic component, 1 circuits are implemented. 156.25MHz is the maximal value for normal operation. Thanks to the Surface Mount, this electric component can easily be installed on a panel. As long as there are 2.97V~3.63V supply voltages provided, clock generator ic should work. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. The frequency synthesizer in this product is compatible with all levels of CMOS, LVDS, LVPECL logic. As far as this electronic part is concerned, it can be classified as a Clock Generator, Fanout Distribution, Multiplexer component. In particular, this clock PLL is designed to be used with microprocessors. According to the base part number, its related parts can be founded. PLL is designed with 40 pins. RF synthesizers can handle a voltage of 3.3V as the supply voltage. In general, this clock PLL is considered a Clock Generators device. Clock PLL is facilitated with 7 signal outputs to magnify output frequency as high as possible. At frequencies of 125MHz, RF synthesizer achieves high efficiency. There are 2 elements in this clock generator which has a low jitter performance.
AD9572ACPZPEC Features
Available in the 40-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9572ACPZPEC Applications
There are a lot of Analog Devices Inc. AD9572ACPZPEC Clock Generators applications.
- Clock generation systems
- Coherent detection of the signal
- Computers to manage memory cards
- Frequency Modulation (FM) stereo decoders
- Carrier synchronization in wired communication
- Time to digital converters
- Main oscillator in receiver
- Wireless base station for LTE, LTE-advanced
- Sampling clocks for ADC and DAC
- Microprocessor clock multipliers