AD9833BRMZ
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | DSP Peripherals |
| Technology | CMOS |
| Voltage - Supply | 2.3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD9833 |
| Pin Count | 10 |
| Output Type | Voltage |
| Power Supplies | 2.5/5V |
| Interface | Serial |
| Operating Supply Current | 5.5mA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 27.5mW |
| Max Supply Current | 5.5mA |
| uPs/uCs/Peripheral ICs Type | DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR |
| Sampling Rate | 25 Msps |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Nominal Output Voltage | 650mV |
| Signal to Noise Ratio (SNR) | 60 dB |
| Number of D/A Converters | 1 |
| Resolution (Bits) | 10 b |
| Tuning Word Width (Bits) | 28b |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
AD9833BRMZ Overview
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) includes it as part of its package.Currently, there is a package in the way of Tube.Surface Mount is mounted in the way.In order for it to operate, it requires a voltage supply of 2.3V~5.5V.In this electrical device, the operating temperature is -40°C~105°C.There is a 10 pin count on this device.As an alternative to 10 terminations, there are devices that match the characteristic impedance of transmission lines.In this electrical device, the peak reflow temperature (Cel) is 260.A voltage of 2.5V is required to operate this electrical device.It is possible to determine the related parts of a base part number.10 pins are pronged contacts located on the signal interface of a computer or other communication device.Surface Mount mounted in the way.It operates at a frequency of 25MHz.There is a nominal supply current of 10μA.There is a maximum current supply for its operation of 5.5mA.In this DC switching regulator, a supply current of 5.5mA is used to operate it.uPs/uCs/Peripheral ICs type for this electrical device is DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR.DSP Peripherals contains this part.The device is powered by 2.5/5V power supplies.In the configuration, Voltage is used as the output.It is necessary to distinguish between a 1 D/A converter, which converts digital signals into analog form, and an A/D converter, which converts analog signals into digital form.
AD9833BRMZ Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
10 pin count
10 pins
2.5/5V power supplies
1 D/A converters
AD9833BRMZ Applications
There are a lot of Analog Devices Inc. AD9833BRMZ DDS applications.
- Telecom and datacom networking applications
- Gigabit Ethernet
- Clock radio
- Cable network front end
- Interconnection between switches and computers
- Tuner
- Thermal management
- interconnection between computers
- Wireless teaching
- Indoor ad hoc meeting
