ADA4091-2ARZ-R7
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4091 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 400μA |
| Quiescent Current | 200μA |
| Supply Current-Max | 0.7mA |
| Slew Rate | 0.46V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 121 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 250μV |
| Gain Bandwidth Product | 1.27MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1220 kHz |
| Voltage Gain | 117dB |
| Average Bias Current-Max (IIB) | 0.35μA |
| Power Supply Rejection Ratio (PSRR) | 126dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 35μV |
| Settling Time | 22 μs |
| Micropower | YES |
| Input Voltage Noise Density | 24nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
ADA4091-2ARZ-R7 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. In total, there are 8 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 250μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Operational amplifier can operate supply current at 400μA. There should be no change in the voltage gain. 2 channels are available on the instrumentation amplifier. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. There is an 200μA quiescent current running through op amp ic.
ADA4091-2ARZ-R7 Features
8 Pins
supply voltage of 5V
117dB voltage gain
Output Type: Rail-to-Rail
ADA4091-2ARZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4091-2ARZ-R7 Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Vehicle electronics
- Active probe
- RF cable systems
- Scintillation detectors
- Industrial applications including automation
- Strain gauges
- Logarithmic operation circuits
- Proportional counter tubes
- High speed sample
