ADA4177-4ARZ-R7
| Parameters | |
|---|---|
| Common Mode Rejection Ratio | 128 dB |
| Current - Input Bias | 300pA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 2μV |
| Gain Bandwidth Product | 3.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3500 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Supply Voltage Limit-Max | 18V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4177 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 4 |
| Operating Supply Current | 500μA |
| Slew Rate | 1.5V/μs |
| Amplifier Type | General Purpose |
ADA4177-4ARZ-R7 Overview
Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. We are approaching the 14h termination of the year. Buffer amplifier has a total of 14 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 2μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Using a supply current of 500μA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 120dB. A instrumentation amplifier like this has 4 circuits. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals.
ADA4177-4ARZ-R7 Features
14 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
ADA4177-4ARZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4177-4ARZ-R7 Instrumentational OP Amps applications.
- Gaming industry
- Inverse/same-phase proportional circuit
- Weak signal detection
- High/low-pass filter circuit
- Portable docking station
- Displayers for aircraft and air transportation control systems
- Image computer boards
- Multiplication circuits
- Home audio systems
- Automotive sensors
