ADA4505-2ARMZ-RL
| Parameters | |
|---|---|
| Operating Supply Current | 14μA |
| Quiescent Current | 7μA |
| Supply Current-Max | 0.03mA |
| Slew Rate | 0.006V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 50kHz |
| Unity Gain BW-Nom | 50 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.000375μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Capacitance | 4.7pF |
| Wideband | NO |
| Input Voltage Noise Density | 65nV/sqrt Hz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4505 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
ADA4505-2ARMZ-RL Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 8. A total of 8 pins are located on this board. The linear amplifier should be run at 1.8V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. It has 8 pins that make up the linear amplifier. Op amp ic rates 3mV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 14μA . Keeping the voltage gain at 120dB is the best course of action. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 3V. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. There is a quiescent current of 7μA in this operational amplifier circuit.
ADA4505-2ARMZ-RL Features
8 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
ADA4505-2ARMZ-RL Applications
There are a lot of Analog Devices Inc. ADA4505-2ARMZ-RL Instrumentational OP Amps applications.
- Scintillation detectors
- Polarized electrodes
- Automation control systems
- Integrator circuits
- ECG equipment
- High-frequency data acquisition systems
- Switching amplifier
- Weighing systems
- Proportional operation circuits
- Fast A/D and D/A converters
