ADA4528-1ARMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4528 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.5mA |
| Quiescent Current | 1.4mA |
| Supply Current-Max | 2.2mA |
| Min Input Voltage | 2.2V |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 160 dB |
| Current - Input Bias | 90pA |
| Max Input Voltage | 5.5V |
| Voltage - Supply, Single/Dual (±) | 2.2V~5.5V ±1.1V~2.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2.5μV |
| Gain Bandwidth Product | 4MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 139dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 150dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 0.3μV |
| Settling Time | 10 μs |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 1kHz |
| Bias Current-Max (IIB) @25C | 0.0004μA |
| Programmable Power | NO |
| Input Capacitance | 33pF |
| Wideband | NO |
| Input Voltage Noise Density | 5.9nV/sqrt Hz |
| Height | 950μm |
| Length | 3.2mm |
| Width | 3.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4528-1ARMZ-R7 Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. Zero-Drift-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 2.5V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 8 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 2.5μV. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. A supply current of 1.5mA can be used to operate this linear amplifier. It is a member of the 139dB's 139dB family. Op amp ic has 1 channels. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a result, linear amplifier's quiescent current is 1.4mA.
ADA4528-1ARMZ-R7 Features
8 Pins
supply voltage of 2.5V
139dB voltage gain
Output Type: Rail-to-Rail
ADA4528-1ARMZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4528-1ARMZ-R7 Instrumentational OP Amps applications.
- Car stereo
- Integrator circuits
- Automatic control
- Commercial audio systems
- Vehicle electronics
- Portable media players
- Displayers for aircraft and air transportation control systems
- Multimedia playback equipment
- Measurements of Wheatstone bridge
- Instrumentation
