ADA4805-1AKSZ-R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4805 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 500μA |
| Output Current | 58mA |
| Min Input Voltage | 2.7V |
| Slew Rate | 160V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 133 dB |
| Current - Input Bias | 470nA |
| Max Input Voltage | 10V |
| Voltage - Supply, Single/Dual (±) | 3V~5V ±1.5V~5V |
| Output Current per Channel | 73mA |
| Input Offset Voltage (Vos) | 9μV |
| Bandwidth | 120MHz |
| Gain Bandwidth Product | 120MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 109dB |
| Average Bias Current-Max (IIB) | 0.8μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 5.5V |
| -3db Bandwidth | 105MHz |
| Max Frequency | 100kHz |
| Dual Supply Voltage | 3V |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4805-1AKSZ-R2 Overview
A 6-TSSOP, SC-88, SOT-363 case is used to package the op amp. A General Purpose-type buffer amplifier is shown here. The op amp is delivered to you in a Cut Tape (CT) case. There is a growing number of terminations approaching the number of 6. In this case, there are 6 pins on the board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 6 pins. With regard to input offset voltage, instrumentation amplifier is rated at 9μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using a supply current of 500μA , this buffer op amp will be able to operate. You should keep the voltage gain at 109dB for the time being. This op amp contains 1 circuits. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits.
ADA4805-1AKSZ-R2 Features
6 Pins
supply voltage of 5V
109dB voltage gain
Output Type: Rail-to-Rail
ADA4805-1AKSZ-R2 Applications
There are a lot of Analog Devices Inc. ADA4805-1AKSZ-R2 Instrumentational OP Amps applications.
- PDA
- Weighing systems
- Blood pressure sensors
- Fast A/D and D/A converters
- Tablets
- Strain gauges
- Industrial control system
- Large motor controllers
- Multiplication circuits
- Scintillation detectors
