ADA4807-2ARMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4807 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 950μA |
| Output Current | 60mA |
| Min Input Voltage | 2.7V |
| Slew Rate | 145V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 1.2μA |
| Max Input Voltage | 11V |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V |
| Output Current per Channel | 106mA |
| Input Offset Voltage (Vos) | 20μV |
| Bandwidth | 180MHz |
| Gain Bandwidth Product | 180MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 1.6μA |
| Power Supply Rejection Ratio (PSRR) | 98dB |
| Supply Voltage Limit-Max | 5.5V |
| -3db Bandwidth | 170MHz |
| Max Frequency | 100kHz |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Height | 950μm |
| Length | 3.2mm |
| Width | 3.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4807-2ARMZ Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a Voltage Feedback type op amp. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 8. There are a total of 8 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are located on the operational amplifiers. Op amp ic rates 20μV for input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 950μA . Keeping the voltage gain at 130dB is the best course of action. The buffer amp consists of 2 circuits in total. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals.
ADA4807-2ARMZ Features
8 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
ADA4807-2ARMZ Applications
There are a lot of Analog Devices Inc. ADA4807-2ARMZ Instrumentational OP Amps applications.
- Polarized electrodes
- Differentiator circuits
- Signal filtering
- Scintillation detectors
- Biopotential
- Video conversion and routing
- Mobile phone
- Test and measurement instruments
- Measurements of Wheatstone bridge
- Television broadcasting equipment
