ADA4841-1YRJZ-R7
| Parameters | |
|---|---|
| Base Part Number | ADA4841 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Output Current | 60mA |
| Quiescent Current | 1.2mA |
| Slew Rate | 13V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 114 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 80MHz |
| Gain Bandwidth Product | 30MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 124dB |
| Average Bias Current-Max (IIB) | 5.3μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 40μV |
| Settling Time | 1 μs |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 5.3μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1pF |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
ADA4841-1YRJZ-R7 Overview
Op amp is packaged in SOT-23-6 case. Voltage Feedback-type instrumentation amplifiers are used in this application. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. During the past two weeks, there have been close to 6 terminations. The total number of pins on linear amplifier is 6. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 6 pins. In terms of the input offset voltage, instrumentation amplifier rates at 300μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . An 1.5mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. There is an 1.2mA quiescent current running through op amp ic.
ADA4841-1YRJZ-R7 Features
6 Pins
supply voltage of 5V
124dB voltage gain
Output Type: Rail-to-Rail
ADA4841-1YRJZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4841-1YRJZ-R7 Instrumentational OP Amps applications.
- Automatic control
- Navigation
- Proportional operation circuits
- Scintillation detectors
- Video computer boards
- Television
- earphone
- Power transmission
- single/dual op amp sum and difference circuits
- Tablets
