ADAU1381BCBZ-RL7
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 4 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-UFBGA, WLCSP |
| Number of Pins | 30 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Terminal Finish | MATTE TIN |
| Subcategory | Other Consumer ICs |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADAU1381 |
| Pin Count | 30 |
| Power Supplies | 3.3V |
| Interface | I2C, I2S, SPI, Serial |
| Max Supply Voltage | 3.65V |
| Min Supply Voltage | 1.8V |
| Data Interface | SPI |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 1.8V~3.65V |
| Voltage - Supply, Digital | 1.63V~3.65V |
| Number of A/D Converters | 2 |
| Signal to Noise Ratio (SNR) | 97 dB |
| Resolution (Bits) | 24 b |
| Sigma Delta | No |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 96.5 / 100 |
| S/N Ratio, ADCs / DACs (db) Typ | 97 / 100 |
| Height Seated (Max) | 0.65mm |
| Length | 3.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADAU1381BCBZ-RL7 Overview
For space-saving reasons, it is supplied in a 30-UFBGA, WLCSP package. This package uses the Tape & Reel (TR) packaging method. This electronic component is of the type Stereo Audio, allowing it to provide high-efficiency performance in various applications. It employs Surface Mount as its mounting type. Using -25°C~85°C as the operating performance allows it to operate normally. In addition, it is equipped with 2 / 2 ADCs and DACs. Supply voltage is 1.8V~3.65V for the analog circuit. A 1.63V~3.65V supply voltage is applied to the digital circuit. There are 30 terminations used to prevent signals from reflecting off the end of the transmission line. It is a kind of 30-pin electronic device. There are 30 pins configured on this board. Its base part number ADAU1381 can be used to find more related parts. Based on the Surface Mount technology, the module is mounted to a PCB. Supply voltage should be maintained at 3.65V. Analog signals are converted into digital signals using 2 A/D converters. This electronic part is classified into the subcategory of Other Consumer ICs. A minimum supply voltage of 1.8V should be maintained. A power supply of 3.3V is required for operation.
ADAU1381BCBZ-RL7 Features
Embedded in the 30-UFBGA, WLCSP package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
2 A/D converters
ADAU1381BCBZ-RL7 Applications
There are a lot of Analog Devices Inc. ADAU1381BCBZ-RL7 CODECs Interface ICs applications.
- Data distribution
- Linear distance measurement
- Registration mark timing
- Autonomous vehicles & robots
- Half adders
- Sawmills
- Switching function
- Image compression
- Timber products
- Motor feedback
