ADC08831IM/NOPB
| Parameters | |
|---|---|
| Resolution | 1 B |
| Sampling Rate | 181 ksps |
| Voltage - Supply, Analog | 4.5V~6V |
| Voltage - Supply, Digital | 4.5V~6V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 250k |
| Output Bit Code | BINARY |
| Power Consumption | 5mW |
| Integral Nonlinearity (INL) | 0.2 LSB |
| Sample and Hold / Track and Hold | TRACK |
| Conversion Rate | 181 ksps |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 48.5 dB |
| Differential Nonlinearity | 0.2 LSB |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | ADC08831 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Polarity | Unipolar |
| Power Supplies | 5V |
| Configuration | MUX-S/H-ADC |
| Number of Channels | 1 |
| Interface | Serial |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 1.7mA |
| Power Dissipation | 8.5mW |
| Number of Bits | 8 |
| Input Type | Differential, Pseudo-Differential, Single Ended |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | SPI, DSP |
ADC08831IM/NOPB Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 8-SOIC (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 250k Hz.The input type of this electronic AD converter is Differential, Pseudo-Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is 4.5V~6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADC08831 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single can be used to categorize supply types.The supply/digital voltage of this electrical AD converter is 4.5V~6V.It is possible to mount the analogue to digital converter using Surface Mount.The ADC converter operates with the maximal supply voltage of 6V.It operates with the minimal supply voltage of 4.5V.This electrical digital converter operates from a supply voltage of 5V.The ADC converter operates from 5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 8.5mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 181 ksps.
ADC08831IM/NOPB Features
1 Functions
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 4.5V
5V power supplies
ADC08831IM/NOPB Applications
There are a lot of Texas Instruments ADC08831IM/NOPB ADC applications.
- Medical Imaging
- AC motor control
- 4-channel data acquisition
- Multiplexed Data Acquisition Systems
- Scientific instruments
- 3-phase power control
- Communication test equipment
- Micro and pico cell systems, software radios
- Data Acquisition Systems
- Battery Operated Systems
