ADCMP602BRMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 23mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADCMP602 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 6mW |
| Output Current | 50mA |
| Max Supply Current | 4mA |
| Propagation Delay | 5 ns |
| Quiescent Current | 2mA |
| Response Time | 5 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 2.1mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 85dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 2mA |
| Voltage - Input Offset (Max) | 5mV @ 2.5V |
| Current - Input Bias (Max) | 5μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP602BRMZ Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for ease of transportation.The comparator has a CMOS, TTL output.Electronic comparator is shipped by Tube .The comparator has 8 terminals.Electronic comparator is a component of the Comparator family.In general, the chip type can be classified as with Latch .A total of 1 elements can be found in it.Electronic comparator has 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.Electronic comparator has 8 pins.You can find more pin-to-pin solutions by searching ADCMP602 .In this comparator, the quiescent current is 2mA .Electronic comparator is recommended that the nominal supply current be 3.5mA in order to use the device normally.The compartator could be damaged if the current supply exceeds 4mA .Electronic comparator is possible to input a maximum of 5μA current into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 85dB .The normal operation of the system requires 5V operating voltage.
ADCMP602BRMZ Features
CMOS, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 2mA
Voltage Gain: 85dB
ADCMP602BRMZ Applications
There are a lot of Analog Devices Inc. ADCMP602BRMZ linear comparators applications.
- Analog front end
- DC/DC and AC/DC power supplies
- System control and monitoring
- Zero-Crossing Detectors
- Automatic Test Equipment
- Building automation
- General Purpose Low Voltage Applications
- Automotive
- Metering Systems
- Threshold Detectors
