ADF4108BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 3.2V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 8GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4108 |
| Output | Clock |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3.2V |
| Number of Circuits | 1 |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Max Supply Current | 17mA |
| Bandwidth | 8 GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | No/No |
| Height | 830μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4108BCPZ Overview
A clock integrated circuit is packaged in a Tray-shaped package because it is for use as a clock. There is a clock generator embedded in the 20-WFQFN Exposed Pad, CSP package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. It contains 20 terminations that can be found in frequency synthesizer. This time clock generator should be voltaged at 3.3V. This Clock PLL will be fed by CMOS, TTL as its input. For full access to the electronic component's capabilities, 1 circuits are implemented. This component can be conveniently installed on the panel thanks to the Surface Mount. There is a maximum voltage of 3.6V for this clock generator. This frequency synthesizer requires a supply voltage above 3.2V to be safe. There should be 3.2V~3.6V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. Clock is designed for clock generator's output. It has been classified as a Clock/Frequency Synthesizer (RF) electronic part, which means that it is a semiconductor. In particular, this clock PLL is designed to be used with microprocessors. According to the base part number, its related parts can be founded. There are a number of 20 pins that are available on the clock generators. Electronic frequency generator can handle voltages up to 3.3V. The device is usually classified as a type of PLL or Frequency Synthesis Circuits device. At a frequency of 8GHz, the system can achieve high efficiency. To fully perform its function, time clock generator requires a supply current of 15mA. During this clock generator operation, a maximum current of 17mA is supplied.
ADF4108BCPZ Features
Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ADF4108BCPZ Applications
There are a lot of Analog Devices Inc. ADF4108BCPZ Clock Generators applications.
- Digital switching systems
- Infotainment systems
- Instrument
- FPGA and processor clocks
- Microwave backhaul IF
- Quenching?
- Laptops
- Picocells, femtocells and small cells
- Mixed mode (analog and digital) applications
- Navigation, positioning and surveillance system for aircraft, ships and ships
