ADF4108BCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 3.2V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4108 |
| Output | Clock |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3.2V |
| Number of Circuits | 1 |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Frequency (Max) | 8GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | No/No |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4108BCPZ-RL7 Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. There is a clock generator embedded in the 20-WFQFN Exposed Pad, CSP package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. 20 terminations can be found in frequency generators. This electronic frequency generator requires a voltage of 3.3V. This clock generator receives its inputs from CMOS, TTL, which is designed to be the clock source. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. 8GHz is the maximal value for normal operation. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximal supply voltage (Vsup) reaches 3.6V. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3.2V. As far as the supply voltage is concerned, clock PLL can be used with 3.2V~3.6V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. The RF synthesizer is compatible with Clock logic levels. This electronic component can be classified as a Clock/Frequency Synthesizer (RF). The clock-generating IC is a 20-bit device designed specifically for microprocessors. This part number is related to its related electronic parts. PF synthesizers is equipped with 20 pins. The supply voltage should be maintained at 3.3V for high efficiency. As such, it is often referred to as a kind of PLL or Frequency Synthesis Circuits clock PLL. For the clock time generator to function properly, 15mA of supply current must be provided.
ADF4108BCPZ-RL7 Features
Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ADF4108BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4108BCPZ-RL7 Clock Generators applications.
- Signal demodulation
- Aerospace and defense
- Integrated phase noise in aerospace systems
- Wireless infrastructure
- Small signal recovery
- PCI express cards
- High-frequency induction heating
- Threshold extension
- Automatic control system test
- GPS systems
