ADF4110BRUZ
| Parameters | |
|---|---|
| Type | Clock/Frequency Synthesizer (RF) |
| Additional Feature | 6-BIT SWALLOW COUNTER |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Frequency | 550MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4110 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 4.5mA |
| Max Supply Current | 5.5mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Height | 1.05mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
ADF4110BRUZ Overview
In order to package it as a clock IC, the Tube package is used. Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. There are a total of 16 terminations in this file. This time clock generator should be voltaged at 3V. There is a Clock PLL called CMOS, TTL which is designed to be the input to this clock generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This frequency synthesizer requires a supply voltage above 2.7V to be safe. As long as you provide 2.7V~5.5V supply voltage, it will work. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. A frequency synthesizer which is compatible with the Clock logic levels is presented here. This electronic component is usually classified as a Clock/Frequency Synthesizer (RF) component. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. This part number ADF4110 is related to the following electrical components. There is a 16 pin that is available on the frequency synthesizers. Time clock generator can handle a voltage of 5V as the supply voltage. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. A frequency synthesizer with 6-BIT SWALLOW COUNTER features better clock signal output. The output frequency can be amplified as high as possible with its 1 signal outputs. At 550MHz, frequency synthesizer achieves high efficiency. For the time clock generator to operate properly, 4.5mA of supply current are required. It is possible to supply up to 5.5mA of current for this clock generator operation.
ADF4110BRUZ Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4110BRUZ Applications
There are a lot of Analog Devices Inc. ADF4110BRUZ Clock Generators applications.
- Peripheral devices
- Pagers
- Sampling clocks for ADC and DAC
- Satellite navigation communication
- Electronic equipment
- Broadcast communication
- Mixed mode (analog and digital) applications
- Radio receivers
- Notebooks
- Cellular/4G
