banner_page

ADF4153YCPZ

3V Fractional N Synthesizer (RF) 4GHz ADF4153 Clock Generators 20 Pins 20-VFQFN Exposed Pad, CSP 20 Terminals Surface Mount 2.7V~3.3V Tray


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADF4153YCPZ
  • Package: 20-VFQFN Exposed Pad, CSP
  • Datasheet: PDF
  • Stock: 913
  • Description: 3V Fractional N Synthesizer (RF) 4GHz ADF4153 Clock Generators 20 Pins 20-VFQFN Exposed Pad, CSP 20 Terminals Surface Mount 2.7V~3.3V Tray (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-VFQFN Exposed Pad, CSP
Number of Pins 20
Operating Temperature -40°C~125°C
Packaging Tray
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Type Fractional N Synthesizer (RF)
Subcategory PLL or Frequency Synthesis Circuits
Technology BICMOS
Voltage - Supply 2.7V~3.3V
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number ADF4153
Output Clock
Pin Count 20
Number of Outputs 1
Qualification Status Not Qualified
Operating Supply Voltage 5V
Supply Voltage-Max (Vsup) 3.3V
Supply Voltage-Min (Vsup) 2.7V
Operating Supply Current 20mA
Nominal Supply Current 20mA
Max Supply Current 100μA
Frequency (Max) 4GHz
Input CMOS, TTL
Ratio - Input:Output 2:1
PLL Yes
Differential - Input:Output Yes/No
Divider/Multiplier No/Yes
Height 950μm
Length 4.1mm
Width 4.1mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADF4153YCPZ Overview


As a clock IC, it uses the Tray package. This clock generator is embedded in the 20-VFQFN Exposed Pad, CSP package. This clock generator will sustain a maximum temperature of NOT SPECIFIED when reflown. In it, there are 20 terminations to be found. The supply voltage of 3V allows for high efficiency. There is a Clock PLL called CMOS, TTL which is designed to be the input to this clock generator. This clock-based frequency generator provides a frequency up to 4GHz Max. Because of the Surface Mount, clock PLL can be easily mounted on the panel. It would be possible to supply this clock PLL with 3.3V of power. For safety reasons, this frequency synthesizer should have a voltage supply above 2.7V. As long as you provide 2.7V~3.3V supply voltage, it will work. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~125°C. The RF synthesizer is compatible with Clock logic levels. As far as this electronic part is concerned, it can be classified as a Fractional N Synthesizer (RF) component. In particular, this clock PLL is designed to be used with microprocessors. This part number ADF4153 is related to the following electrical components. There are 20 pins that are available on the frequency generator. The maximum supply voltage that analog clock generator can handle is 5V. As such, it is often referred to as a kind of PLL or Frequency Synthesis Circuits clock PLL. 1 signal outputs enable clock PLL to magnify output frequency as high as possible. In order for it to fully perform time clock generator's functions, it needs a supply current of 20mA. It is possible to supply up to 100μA of current for this clock generator operation.

ADF4153YCPZ Features


Available in the 20-VFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 5V

ADF4153YCPZ Applications


There are a lot of Analog Devices Inc. ADF4153YCPZ Clock Generators applications.

  • Computers to manage memory cards
  • Bit synchronization
  • Tracking filters
  • Instrument
  • Line cards used in telephone exchange
  • Antenna automatic tracking
  • FM demodulation networks for FM operations
  • Signal frequency synthesis circuits
  • Jitter reduction
  • Melting

Write a review

Note: HTML is not translated!
    Bad           Good