ADF4157BRUZ
| Parameters | |
|---|---|
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Fractional N Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 6GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4157 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 3V |
| Power Supplies | 3.3/5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 23mA |
| Nominal Supply Current | 23mA |
| Max Supply Current | 23mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | Yes/Yes |
| Height | 1.2mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
ADF4157BRUZ Overview
A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. 16-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. In it, there are 16 terminations to be found. A voltage of 3V should be applied to this electronic frequency generator. It is designed that the Clock PLL's input should be CMOS, TTL. This component can be conveniently installed on the panel thanks to the Surface Mount. In order to maintain safety, this frequency generator should be supplied with voltages above 2.7V. Clock PLL works with 2.7V~3.3V supply voltage provided. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. Clock is designed for clock generator's output. As far as this electronic part is concerned, it can be classified as a Fractional N Synthesizer (RF) component. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. Related electrical parts can be found for the base part number ADF4157. There are 16 pins that are available on the frequency generator. Supply voltage 3V is what clock generator can handle. Fundamentally, this is a kind of PLL or Frequency Synthesis Circuits clock PLL. 1 signal outputs enable clock PLL to magnify output frequency as high as possible. Frequency generator is able to reali6GHze high efficiency when operating at a frequency of 6GHz. In order for it to fully perform time clock generator's functions, it needs a supply current of 23mA. It is possible to supply up to 23mA of current for this clock generator operation.
ADF4157BRUZ Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V
ADF4157BRUZ Applications
There are a lot of Analog Devices Inc. ADF4157BRUZ Clock Generators applications.
- Radio receivers
- Satellite navigation communication
- Set-top boxes
- Frequency Modulation (FM) stereo decoders
- Mechanical devices
- Simple clock clean-up circuits
- Broadcast communication
- Smartphones
- Various decoding circuits
- Radiotelephones
