ADF5002BCPZ
| Parameters | |
|---|---|
| Type | Prescaler |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF5002 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Operating Supply Current | 30mA |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 18GHz |
| Input | Clock |
| Output Polarity | COMPLEMENTARY |
| Ratio - Input:Output | 1:1 |
| PLL | No |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | Yes/No |
| Height | 800μm |
| Length | 3.1mm |
| Width | 3.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
ADF5002BCPZ Overview
As a clock IC, it is packaged by the Tray method. In the 16-WFQFN Exposed Pad, CSP package, there is an embedded clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. 16 terminations can be found in frequency synthesizer. This clock generator ic should receive a voltage of 3.3V. It is designed that the Clock PLL's input should be Clock. A total of 1 circuits are implemented to access the full performance of the electrical part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 18GHz. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximum voltage this clock PLL can handle is 3.6V. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. There are 3V~3.6V available for use with this clock PLL. The temperature should be set at -40°C~105°C to ensure reliable performance. This is an electronic part that can be classified as a Prescaler in this case. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. According to the base part number, its related parts can be founded. There are 16 pins on the frequency generator that are available for use. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. For the time clock generator to operate properly, 30mA of supply current are required. During these clock generator operations, the maximum current supplied reaches 30mA.
ADF5002BCPZ Features
Available in the 16-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ADF5002BCPZ Applications
There are a lot of Analog Devices Inc. ADF5002BCPZ Clock Generators applications.
- Televisions
- Wi-Fi routers
- Signal demodulation
- Aerospace and defense
- Cell phones
- Sampling clocks for ADC and DAC
- Electronic equipment
- Set-top boxes
- Ports
- 10 Gigabit Ethernet
