ADG1422BCPZ-REEL7

145ns, 145ns SPST - NC 2.4Ohm Analog Switches BREAK-BEFORE-MAKE ADG1422 10 Pins 500pA 5V 10-VFDFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1422BCPZ-REEL7
Package: 10-VFDFN Exposed Pad, CSP
Datasheet: PDF
Stock: 449
Description: 145ns, 145ns SPST - NC 2.4Ohm Analog Switches BREAK-BEFORE-MAKE ADG1422 10 Pins 500pA 5V 10-VFDFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type	Surface Mount
Package / Case	10-VFDFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	10
ECCN Code	EAR99
Resistance	2.4Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.8mW
Technology	CMOS
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	ADG1422
Pin Count	10
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	1.8mW
Max Supply Current	190μA
Turn On Delay Time	145 ns
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	2.4Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	18pF 22pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	145ns, 145ns
Insertion Loss (dB)	0.12 dB
Charge Injection	-5pC
Channel-to-Channel Matching (ΔRon)	20m Ω
Crosstalk	-74dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	395ns
Normal Position	NC
Height Seated (Max)	0.8mm
Length	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1422BCPZ-REEL7 Overview

Due to its 10-VFDFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around -40°C~125°C TA. Totally, there are 10 terminations. This electronic part offers high-quality output due to its 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. It is part of the design of the 10 series that this electronic component is included. A SPST - NC switching circuit is used for these analog switches. This multiplexer is composed of 2 circuits. Try searching with ADG1422 to find analog multiplexer variants. There is 2.4Ohm internal resistance in this digital multiplexer. The functions of 10 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 5V. A voltage higher than 190μA may cause damage to the switch multiplexer. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. With dual power supplies, you should attach at least 5V. This electrical part is compatible with 12V operating voltages. The transfer of data can be performed over 180MHz bandwidths.