ADG1636BRUZ

95ns, 161ns SPDT 1.1Ohm Analog Switches BREAK-BEFORE-MAKE ADG1636 16 Pins 250pA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1636BRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 319
Description: 95ns, 161ns SPDT 1.1Ohm Analog Switches BREAK-BEFORE-MAKE ADG1636 16 Pins 250pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	1.1Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.5mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1636
Pin Count	16
Number of Outputs	4
Qualification Status	Not Qualified
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16V
Min Supply Voltage	3.3V
Test Frequency	1MHz
Analog IC - Other Type	SPST
Power Dissipation	4.5mW
Max Supply Current	360μA
Turn On Delay Time	148 ns
Number of Inputs	2
Voltage - Supply, Single/Dual (±)	3.3V~16V ±3.3V~8V
Supply Type	Dual, Single
Bandwidth	27MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	228 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	1.1Ohm
Min Dual Supply Voltage	3.3V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	65pF 120pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	95ns, 161ns
Charge Injection	150pC
Channel-to-Channel Matching (ΔRon)	30m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	176ns
Height	1.2mm
Length	5.1mm
Width	4.5mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1636BRUZ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:1. Increasing operating temperature to around -40°C~125°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching with ADG1636 to find analog multiplexer variants. A 1.1Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 16V to a switch device. Dual, Single supply type digital switch with a low cost. 3.3V is the lowest voltage that should be fed to the electronic electronic part. Put voltage above 360μA on the multiplexer to cause damage. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 8V. A dual power supply should have at least 3.3V voltage attached. It is integrated with a SPST analog IC. It is possible to operate 2 inputs. The data can be transferred over a wide range of bandwidths, called 27MHz bandwidths. A analog switch ics with 4 outputs is included.