ADG201HSKPZ

50ns, 50ns SPST - NC 50Ohm QUAD Analog Switches ADG201 20 Pins 1nA 15V 20-LCC (J-Lead)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG201HSKPZ
Package: 20-LCC (J-Lead)
Datasheet: PDF
Stock: 547
Description: 50ns, 50ns SPST - NC 50Ohm QUAD Analog Switches ADG201 20 Pins 1nA 15V 20-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	50Ohm
Min Dual Supply Voltage	10.8V
High Level Output Current	20mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	10pF 10pF
On-state Resistance Match-Nom	3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	50ns, 50ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	1.5 Ω
Crosstalk	-86dB @ 100kHz
Drain to Source Resistance	50Ohm
Height	4.454mm
Length	9.04mm
Width	8.38mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	20-LCC (J-Lead)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	50Ohm
Additional Feature	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE
Max Power Dissipation	240mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG201
Pin Count	20
Qualification Status	Not Qualified
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	10.8V
Power Dissipation	240mW
Max Supply Current	10mA
Throw Configuration	SPST
Turn On Delay Time	50 ns
Voltage - Supply, Single/Dual (±)	10.8V~16.5V ±13.5V~16.5V

ADG201HSKPZ Overview

Shipping overseas is convenient due to the electrical component's packing in 20-LCC (J-Lead). Advanced packaging method Tube is used to provide high reliability. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. The total number of terminations is 20. Due to its 4 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. A total of 20 pins are injected into the electrical part body. The analog switch ics are built using SPST - NC switching circuits. Using the ADG201 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 50Ohm. You can find the functions of the 20 pins in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. A cost-effective Dual, Single supply type analogue multiplexer. 10.8V is the lowest voltage that should be fed to the electronic electronic part. The switch multiplexer may be damaged if it is exposed to voltage greater than 10mA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. For dual power supplies, a voltage of at least 10.8V should be attached. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE. It has a Drain to Source resistance of 50Ohm ohms.