ADG3257BRQZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 4.5Ohm |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG3257 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Max Supply Current | 1μA |
| Number of Bits | 8 |
| Throw Configuration | DPST |
| Propagation Delay | 100 ps |
| Quiescent Current | 1μA |
| Turn On Delay Time | 9 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Data Rate | 933 Mbps |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 610MHz |
| Output Polarity | TRUE |
| -3db Bandwidth | 610MHz |
| High Level Output Current | -100mA |
| Low Level Output Current | 100mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG3257BRQZ-REEL Overview
It is included in the 16-SSOP (0.154, 3.90mm Width) in order to save board space.The package is in the form of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The multiplexers uses an analog IC Multiplexer/Demultiplexer as the analog part of the circuit.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 3V~3.6V 4.5V~5.5V, designers have greater flexibility of digital controlled switch.There is a design for terminating 16 as part of its basic configuration.Its logic switch base part number is ADG3257 which can also be used to find its logic switch related parts.The multiplexer's system works with 3.3V voltage.In this turn signal switch, there are 16 component pins.It is the end of conductors that is represented by GULL WING.Single is used as its supply type.With 16 pins, it is configured.As a result, signal multiplexer provides 8 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 3V.There are 2 outputs designed for the operation of the turn signal switch.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.Despite not interacting with external factors, it consumes 1μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.This signal switching operates at a resistance of 4.5Ohm.The turn signal switch's circuit consists of 4 transmission channels.
ADG3257BRQZ-REEL Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
ADG3257BRQZ-REEL Applications
There are a lot of Analog Devices Inc. ADG3257BRQZ-REEL Signal Switches / Multiplexers / Decoders applications.
- HD surveillance system
- Solenoid cooling fan
- Telephone network
- LVDS
- Make full adder
- Steel plants
- High-performance memory-decoding applications
- Microprocessor instruction decoding
- VGA
- Seven segment displays
