Parameters |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Resistance |
45Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
3.77mW |
Technology |
BICMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
ADG333 |
Pin Count |
20 |
Number of Outputs |
8 |
Operating Supply Voltage |
12V |
Polarity |
Non-Inverting |
Number of Channels |
4 |
Interface |
Parallel |
Max Supply Voltage |
30V |
Min Supply Voltage |
3V |
Test Frequency |
1MHz |
Operating Supply Current |
50μA |
Power Dissipation |
3.77mW |
Max Supply Current |
250μA |
Turn On Delay Time |
175 ns |
Voltage - Supply, Single/Dual (±) |
3V~30V ±3V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
145 ns |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
45Ohm |
Min Dual Supply Voltage |
3V |
High Level Output Current |
20mA |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
7pF |
On-state Resistance Match-Nom |
4Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
90ns, 80ns (Typ) |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Crosstalk |
-85dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Height |
2.35mm |
Length |
13mm |
Width |
7.6mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ADG333ABR Overview
The electronic part can be shipped overseas conveniently because it is packaged in 20-SOIC (0.295, 7.50mm Width). To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. 2:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~85°C TA. Total terminations are 20. Due to its 4 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. The electronic part body is injected with 20 pins. Unlike digital switches, these are based on SPDT switching circuits. Use ADG333 to search for variants of the digital switches. As far as internal resistance is concerned, it has 45Ohm. The functions of 20 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 3V is the lowest voltage the electrical component should receive. This multiplexer would work with 50μA current. Putting voltage greater than 250μA on the multiplexer may cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. When using dual power supplies, you should attach at least 3V. This electrical part is compatible with 12V operating voltages. The analogue multiplexer has 8 outputs.
ADG333ABR Features
4 Channels
Switch Circuit: SPDT
50μA Supply Current
ADG333ABR Applications
There are a lot of Analog Devices Inc. ADG333ABR Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Precision test equipment
- CSU
- Remote Powered Equipment
- Private Branch Exchange (PBX)
- High-Voltage
- Cable Modem
- Optical Applications
- Battery Powered Systems
- DSUs