ADG407BNZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 3.1mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | ADG407 |
| Pin Count | 28 |
| Operating Supply Voltage | 12V |
| Supply Voltage-Min (Vsup) | 13.5V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 25V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Nominal Supply Current | 100μA |
| Power Dissipation | 3.1mW |
| Number of Inputs | 16 |
| Supply Current-Max (Isup) | 0.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 110 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 80Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Time (Ton, Toff) (Max) | 160ns, 150ns |
| Charge Injection | 8pC |
| Channel-to-Channel Matching (ΔRon) | 4 Ω |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Neg Supply Voltage-Min (Vsup) | -13.5V |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 4.95mm |
| Length | 39.75mm |
| Width | 14.73mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG407BNZ Overview
The electrical component comes in 28-DIP (0.600, 15.24mm) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tube. A switch device like this is mounted in Through Hole. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Temperatures around -40°C~85°C TA are extended for operation. 28 terminations have been made so far. As a result of its 8 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. Electronic part bodies are injected with 28 pins. 2 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with ADG407 if you are looking for variants. An switch multiplexer with 50Ohm internal resistance has a value of 50Ohm. To find out what the 28 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. 12V operating voltages are supported by the electronic component. There are 16 inputs to be operated. This analog switch ic needs a voltage of 13.5V as its minimum supply voltage.
ADG407BNZ Features
8 Channels
ADG407BNZ Applications
There are a lot of Analog Devices Inc. ADG407BNZ Analog Switches & Multiplexers ICs applications.
- DVD-R
- Ultrasound
- PCMCIA cards
- Audio/video switches
- Audio signal routing
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Video signal routing
- Video switching
- Automotive applications
- Cell phones
