ADG506AKNZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADG506 |
| Pin Count | 28 |
| Number of Channels | 16 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 10mW |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 600 ns |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 600 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 300Ohm |
| Min Dual Supply Voltage | 10.8V |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 44pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Height | 4.95mm |
| Length | 39.75mm |
| Width | 14.73mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG506AKNZ Overview
Shipping overseas is convenient due to the electrical component's packing in 28-DIP (0.600, 15.24mm). This high-reliability packaging method uses advanced packaging methods Tube. In Through Hole, you'll find this switch device. 16:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~85°C TA extended. In total, there have been 28 terminations. A high-quality output is provided by the electrical component's 16 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. The electronic part body is injected with 28 pins. 1 circuits are used in this analogue multiplexer. ADG506 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 300Ohm. You can find the functions of the 28 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 16.5V voltage to the switch device. 10.8V is the lowest voltage that should be fed to the electronic electronic part. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. With dual power supplies, you should attach at least 10.8V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC.
ADG506AKNZ Features
16 Channels
ADG506AKNZ Applications
There are a lot of Analog Devices Inc. ADG506AKNZ Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- Battery Powered Systems
- Microwave transmission systems
- Residential Gateways, Home Gateway/Router
- SONET/SDH ADM
- ISDN NT1/TA
- Imaging
- 65 V DACs
- DSUs
- Digital access cross connects
