ADG658YRQ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| -3db Bandwidth | 210MHz |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 23pF |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switch Time (Ton, Toff) (Max) | 115ns, 45ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.3 Ω |
| Switch-off Time-Max | 55ns |
| Length | 4.9022mm |
| RoHS Status | Non-RoHS Compliant |
ADG658YRQ Overview
As the electronic part is packed in 16-SSOP (0.154, 3.90mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Extended operating temperature around -40°C~125°C TA. There are 16 terminations totally. The electronic part delivers high-quality output through its 8 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. Electronic part bodies are injected with 16 pins. A 1 circuit is present in this switch device. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board.
ADG658YRQ Features
8 Channels
-3db Bandwidth: 210MHz
ADG658YRQ Applications
There are a lot of Rochester Electronics, LLC ADG658YRQ Analog Switches & Multiplexers ICs applications.
- DSUs
- Frame Relay Equipment
- Battery Powered Instruments
- DSLAMs
- Battery-powered systems
- Sample hold systems
- Low-Voltage
- Industrial control systems
- Intelligent PBX
- Cable Modem
