ADG721BRM-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Additional Feature | ALSO OPEARTES AT 5 V SUPPLY |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF 7pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 14ns, 6ns (Typ) |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -97dB @ 1MHz |
| Switch-off Time-Max | 11ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
ADG721BRM-REEL Overview
As the electronic part is packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 1:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. Totally, there are 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. A 3V voltage supply should turn on and run the electronic component. The electronic part body is injected with 8 pins. SPST - NO switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 2. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply. You shouldn't miss the additional features of the electrical component, such as: ALSO OPEARTES AT 5 V SUPPLY.
ADG721BRM-REEL Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 200MHz
Additional Features: ALSO OPEARTES AT 5 V SUPPLY
ADG721BRM-REEL Applications
There are a lot of Rochester Electronics, LLC ADG721BRM-REEL Analog Switches & Multiplexers ICs applications.
- SDH/SONET multiplexers
- Fiber In The Loop (FITL)
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Transmit
- Industrial
- E1 Network Equipment
- Communications systems
- PCMCIA cards
- Video switching
- PBX interfaces
