ADG728BRU
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | AUDIO/VIDEO SWITCH |
| -3db Bandwidth | 65MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 85pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Time (Ton, Toff) (Max) | 95ns, 85ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -75dB @ 1MHz |
| Switch-on Time-Max | 200ns |
| Voltage - Supply, Single (V+) | 2.7V~5.5V |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
ADG728BRU Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tube. It is mounted in the position Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 8 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. The circuits in this analogue multiplexer number 1. This analog switch requires a voltage of 2.7V~5.5V to drain from a single voltage supply. There is an integrated analog IC AUDIO/VIDEO SWITCH in the module.
ADG728BRU Features
8 Channels
-3db Bandwidth: 65MHz
ADG728BRU Applications
There are a lot of Rochester Electronics, LLC ADG728BRU Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Medical Instrumentation
- High speed data transmission line cards
- SDH/SONET multiplexers
- Channelized and Unchannelized DS3 applications
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- DSUs
- Avionics test equipment
- Imaging
- Wireless Local Loop
