ADG732BCPZ
| Parameters | |
|---|---|
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 100μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG732 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Number of Channels | 32 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 20μA |
| Power Dissipation | 100μW |
| Number of Inputs | 32 |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Bandwidth | 18MHz |
| Supply Current-Max (Isup) | 0.02mA |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 16 ns |
| On-State Resistance (Max) | 5.5Ohm |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 32:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 275pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Charge Injection | 1pC |
| Crosstalk | -72dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 37ns |
| Switch-off Time-Max | 26ns |
| Max Junction Temperature (Tj) | 150°C |
| Signal Current-Max | 0.03A |
| Height | 1mm |
ADG732BCPZ Overview
Shipping overseas is convenient due to the electrical component's packing in 48-VFQFN Exposed Pad, CSP. In order to provide high reliability, an advanced packaging method Tray is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 32:1. Operation at a temperature around -40°C~125°C TA. There are 48 terminations totally. By its 32 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 2.5V voltage supply. A key feature of the 48 series is the inclusion of this electronic part as part of its design. It consists of 1 circuits. If you are looking for variants of the digital switch, trying search with ADG732. It has an internal resistance of 5.5Ohm. You can find the functions of the 48 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. 1.8V should be the lowest voltage fed to the electronic component. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Operating voltages range from 5V. A 32 input needs to be operated. In 18MHz-bandwidths, data can be transferred.
ADG732BCPZ Features
32 Channels
Bandwidth: 18MHz
ADG732BCPZ Applications
There are a lot of Analog Devices Inc. ADG732BCPZ Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Industrial and process control systems
- High-Voltage
- Automotive applications
- Battery Powered Instruments
- Communication systems
- Industrial
- Ultrasound
- Central office
- Routers
