ADG739BRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 100μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG739 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Interface | Serial |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | AUDIO/VIDEO SWITCH |
| Operating Supply Current | 10μA |
| Power Dissipation | 100μW |
| Max Supply Current | 20μA |
| Throw Configuration | 4PST |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 100MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 42pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 20ns, 10ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -75dB @ 1MHz |
| Switch-on Time-Max | 70ns |
| Voltage - Supply, Single (V+) | 2.7V~5.5V |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG739BRUZ-REEL7 Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. The operating temperature is extended to around -40°C~85°C TA. In total, there are 16 terminations. The electronic part provides high-quality output because it has 4 channels. A 3V voltage supply should turn on and run the electronic component. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Circuits based on SP4T switching are used to construct these analog switch ics. The multiplexer consists of 2 circuits. Use ADG739 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 4.5Ohm. For functions related to 16 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The analog switch ic is of the Single supply type and is cost-effective. It is recommended to use 2.7V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 10μA. Using only a single voltage supply, this analog switch requires 2.7V~5.5V voltage. It may damage the digital multiplexer if the voltage is higher than 20μA. This product is integrated with an analog integrated circuit (IC) of type AUDIO/VIDEO SWITCH. It is possible to operate 8 inputs. 100MHz bandwidths enable data to be transferred.
ADG739BRUZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
10μA Supply Current
Bandwidth: 100MHz
ADG739BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG739BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Industrial
- Ultrasound
- Routers
- Audio/video switches
- Cell phones
- Relay replacements
- Remote wireless modules
- Digital Cross-Connects
- Residential Gateways, Home Gateway/Router
- Avionics and Military Systems
