ADG772BCPZ-REEL7

12.5ns, 9.5ns SPDT 6.7Ohm Typ QUAD Analog Switches BREAK-BEFORE-MAKE ADG772 10 Pins 200pA 3.3V 10-UFQFN, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG772BCPZ-REEL7
Package: 10-UFQFN, CSP
Datasheet: PDF
Stock: 553
Description: 12.5ns, 9.5ns SPDT 6.7Ohm Typ QUAD Analog Switches BREAK-BEFORE-MAKE ADG772 10 Pins 200pA 3.3V 10-UFQFN, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-UFQFN, CSP
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	6.7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3.3V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG772
Pin Count	10
Number of Outputs	4
Operating Supply Voltage	3.6V
Power Supplies	3/3.3V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	3.6V
Min Supply Voltage	2.7V
Test Frequency	1MHz
Power Dissipation	21.6nW
Max Supply Current	6nA
Turn On Delay Time	9 ns
Number of Inputs	2
Bandwidth	630MHz
Turn-Off Delay Time	6 ns
On-State Resistance (Max)	6.7Ohm Typ
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	200pA
Channel Capacitance (CS(off), CD(off))	2.4pF 6.9pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	12.5ns, 9.5ns
Charge Injection	0.5pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	13.5ns
Voltage - Supply, Single (V+)	2.7V~3.6V
Drain to Source Resistance	8.8Ohm
Signal Current-Max	0.035A
Height Seated (Max)	0.6mm
Length	1.6mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG772BCPZ-REEL7 Overview

Due to its 10-UFQFN, CSP packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 2:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 10. A 1 channel electronic part produces high-quality output. With a 3.3V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 10 series. A SPDT switching circuit is used for these analog switches. Using the ADG772 search parameter, you can discover variants of the switch. Analog switches have 6.7Ohm internal resistance. For details about the functions of 10 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. 2.7V should be the lowest voltage fed to the electronic component. The voltage required by this switch device is 2.7V~3.6V, draining from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 6nA. A voltage of 3.6V can be used to operate the electronic component. Operating the 2 inputs requires 2 inputs. The data can be transferred over a wide range of bandwidths, called 630MHz bandwidths. There is 8.8Ohm Drain to Source resistance on this electronic part. The analog switch ics has 4 outputs.