ADG812YRU
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 90MHz |
| On-State Resistance (Max) | 650mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 30pF 35pF |
| On-state Resistance Match-Nom | 0.04Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 25ns, 5ns |
| Charge Injection | 30pC |
| Channel-to-Channel Matching (ΔRon) | 40m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switch-on Time-Max | 30ns |
| Switch-off Time-Max | 8ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
ADG812YRU Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~125°C TA extended. 16 terminations have been made so far. The electronic part delivers high-quality output through its 1 channels. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. There is an electrical component included in the 16 series. Multiplexers built on a SPST - NO switching circuit are built. A 4 circuit is present in this switch device. This analog switch requires a voltage of 1.65V~3.6V to drain from a single voltage supply.
ADG812YRU Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 90MHz
ADG812YRU Applications
There are a lot of Rochester Electronics, LLC ADG812YRU Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- Remote wireless modules
- DSLAMs
- Battery Powered Instruments
- Audio/video switches
- Access Concentrators
- Audio and video switching
- T1/E1 Terminals
- SDH
- Automatic test equipment
