ADM1176-1ARMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Feature | Auto Retry, I2C, UVLO |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Hot Swap Controller, Monitor |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | General Purpose |
| Voltage - Supply | 3.15V~16.5V |
| Depth | 3mm |
| Base Part Number | ADM1176 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 3.15V |
| Operating Supply Current | 1.7mA |
| Nominal Supply Current | 1.7mA |
| Max Supply Current | 1.7mA |
| Current - Supply | 1.7mA |
| Min Input Voltage | 3.15V |
| Max Input Voltage | 16.5V |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, Turn On Voltage |
| Feature Pins | ON, TIMER |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM1176-1ARMZ-R7 Overview
The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package contains it.In the current state, 1 channels are accessible.The package resembles a Tape & Reel (TR).Surface Mount has set it up this way.The electrical component in question falls into the classification Hot Swap Controller, Monitor.The temperature should be set to -40°C~85°C to ensure reliable functioning.General Purpose applications are available on the device.The article appears in Auto Retry, I2C, UVLO.Hot-swappable device should work if you use a 3.15V~16.5VV power source.ADM1176 numbers belong to this family.This device operates by using 10 pins.There are Current Limit, Fault Timeout, Turn On Voltage features that can be programmed.In the present, there is a shortage of 1.7mA.Surface Mount directs its position.In order to ensure stable operation, a maximum operating temperature of 85°C°C must be set.Maintaining reliability requires a minimum working temperature of -40°C degrees Celsius.Hot Swap is set by default to output 1.There is a maximum supply voltage of 16.5VV that it can handle.With a 3.15VV supply voltage, it can work as low as possible.Currently, 1.7mA is the supply current.1.7mA is the maximum current required for its operation.
ADM1176-1ARMZ-R7 Features
Features of Auto Retry, I2C, UVLO
Programmable features of Current Limit, Fault Timeout, Turn On Voltage
ADM1176-1ARMZ-R7 Applications
There are a lot of Analog Devices Inc. ADM1176-1ARMZ-R7 hot swap controllers applications.
- Industrial computers and servers
- Load transient protection
- Safe board insertion and extraction
- Base station
- Disconnect faulty loads before supply voltage drops
- Short-circuit protection in real time
- Circuit breakers for electronic circuits
- Hard drive
- CompactPCI
- Switch
