ADM3101EARQZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | DUMMY VAL |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM3101 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Interface | RS-232 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Max Supply Current | 5mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 460Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 400mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Simplex/Duplex | Full Duplex |
| Height | 1.65mm |
| Length | 5mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM3101EARQZ Overview
Driver ICs with enhanced 16-SSOP (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.The Tube package contains this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.On any Surface Mount-type PCB or development board, you can install this wide receiver.A power supply of 3V~5.5V is used by this differential driver.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.3.3V is the supply voltage range that this line driver ic can efficiently operate with.The integrated terminations of this wide receiver allow it to drive and receive signals from data.Transceiver comes with 16 standard pinouts that meet the market's requirements.The base part number ADM3101 identifies the product type, temperature, package, etc., so you can search for more variants by using it.16-pin driver chip with enhanced power dissipation.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.In the case of this receiver, a resolution of 1 bits is typically specified.This transceiver module is designed to operate from an input voltage supply of 3.3V.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.ICs implement a total of 1 transceivers.This optical transceiver module also features the DUMMY VAL function, improving the overall signal management stability and accuracy.Using the input voltage of 5mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.can transceivers with an input current greater than 5mA may have malfunctions.
ADM3101EARQZ Features
Tube package
16 pin count
16 pins
ADM3101EARQZ Applications
There are a lot of Analog Devices Inc. ADM3101EARQZ Drivers/Receivers/Transceivers applications.
- Structural bonding
- Low power, low voltage systems
- Car radio
- Car alarm systems
- Laser diode bonding
- Bridges
- Cable network front end
- Datacom networking applications
- Precision geodetic measurement
- Thermal management
