Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Transceiver |
Subcategory |
Line Driver or Receivers |
Technology |
CMOS |
Voltage - Supply |
3V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADM3232 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Interface |
RS-232 |
Operating Supply Current |
3mA |
Nominal Supply Current |
3mA |
Max Supply Current |
3mA |
Logic Function |
Receiver, Transceiver |
Data Rate |
460Kbps |
Differential Output |
NO |
Protocol |
RS232 |
Input Characteristics |
SCHMITT TRIGGER |
Number of Drivers/Receivers |
2/2 |
Receiver Number of Bits |
2 |
Duplex |
Full |
Receiver Hysteresis |
500mV |
Number of Drivers |
2 |
Number of Transceivers |
1 |
ESD Protection |
Yes |
Simplex/Duplex |
Full Duplex |
Out Swing-Min |
5 V |
Height |
1.05mm |
Length |
5mm |
Width |
4.4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADM3232EARUZ Overview
LED drivers benefit from this IC's enhanced 16-TSSOP (0.173, 4.40mm Width) package.This receiver is mounted in the Tube package.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.On any Surface Mount-type PCB or development board, this wide receiver can be placed.A differential driver like this uses 3V~5.5V of power.It is possible to have up to 2/2 receivers/drivers in use simultaneously with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.An operating voltage range of 3.3V is suitable for this line driver ic.The integrated terminations of this wide receiver allow it to drive and receive signals from data.There are 16 pinouts available on this transceiver which are market standard.As the base part number ADM3232 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.This is a 16-pin driver IC with enhanced power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There is a supply voltage of 3.3V on the input of this transceiver module, so it can be operated from that source.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.There are 1 transceivers in total that this module isolated transceiver implements.This electronic part can have?up to 2 eligible drivers on the field at once.?With this integrating circuit you can drive LEDs of a voltage of up to 3mA. It can be used to drive large displays.Input currents above 3mA could lead to mal-functions in this can transceiver.
ADM3232EARUZ Features
Tube package
16 pin count
16 pins
ADM3232EARUZ Applications
There are a lot of Analog Devices Inc. ADM3232EARUZ Drivers/Receivers/Transceivers applications.
- Bridges
- WDM transmission
- Satellite radio receiver
- Automation systems
- Pocket PC
- Home theater wiring-free
- Precision geodetic measurement
- Wireless network systems
- Aircraft positioning
- Single to Multimode Fiber Conversion