ADM3311EACPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM3311 |
| Pin Count | 32 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.7V |
| Interface | RS-232 |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 35mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 460Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 3/5 |
| Duplex | Full |
| Receiver Hysteresis | 140mV |
| Number of Drivers | 3 |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Simplex/Duplex | Full Duplex |
| Number of Receivers | 5 |
| Height | 830μm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM3311EACPZ Overview
Driver ICs with enhanced 32-WFQFN Exposed Pad, CSP packages are excellent for driving LEDs with common characteristics.Tray package is used to mount this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver requires a 2.7V~3.6V power supply.The field can have up to 3/5 eligible receivers/drivers at once when using this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.This line driver ic can operate efficiently with a supply voltage range of 3.3V.Integrated into this wide receiver are 32 terminations that are used for driving and receiving signals from data.As a standard package, this transceiver comes with a 32-pin layout that follows the market standard.The base part number ADM3311 identifies the product type, temperature, package, etc., so you can search for more variants by using it.A 32-pin driver IC with enhanced power dissipation control is featured here.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 2.7V.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.There are 1 transceivers implemented in this module isolated transceiver.This rf transceiver module can have?up to 5 eligible receivers on the field at once.?3 drivers are embedded on the integrator circuit.With this integrating circuit you can drive LEDs of a voltage of up to 1μA. It can be used to drive large displays.If the input current exceeds 35mA, this can transceiver could malfunction.
ADM3311EACPZ Features
Tray package
32 pin count
32 pins
ADM3311EACPZ Applications
There are a lot of Analog Devices Inc. ADM3311EACPZ Drivers/Receivers/Transceivers applications.
- Datacom networking applications
- Cordless telephone
- Mainframes, workstations or storage devices
- Remote controls
- Optical sub-assembly (OSA)
- transmission relay
- Low power, low voltage systems
- Ethernet circuitry
- Satellite communication
- Indoor ad hoc meeting
