ADM3315EARUZ
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM3315 |
| Pin Count | 24 |
| Operating Supply Voltage | 2.7V |
| Interface | RS-232 |
| Operating Supply Current | 850μA |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 460Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 3/3 |
| Receiver Number of Bits | 3 |
| Duplex | Full |
| Receiver Hysteresis | 140mV |
| Number of Drivers | 3 |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Simplex/Duplex | Full Duplex |
| Height | 1.05mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
ADM3315EARUZ Overview
With the enhanced 24-TSSOP (0.173, 4.40mm Width) package, this driver IC is excellent for driving common LEDs.This receiver is mounted in the Tube package.The Transceiver can transceiver type enables this part to be used in a wide range of applications.You can place this wide receiver to any Surface Mount-type PCB or development board.With respect to the power supply, this differential driver uses 2.7V~3.6V.At any given time, there can be up to 3/3 eligible receivers/drivers for this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.An operating voltage range of 3.3V is suitable for this line driver ic.This wide receiver has 24 terminations for driving and receiving data signals.There are 24 pinouts available on this transceiver which are market standard.Since the base part number ADM3315 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation control is provided by this 24-pin driver IC.In most cases, the receiver will be specified with a 3-bit resolution.There is a voltage supply of 2.7V required in order for this transceiver module to be operated.There is a subcategory called Line Driver or Receivers for this rf transceiver module.ICs implement a total of 1 transceivers.Embedded 3 drivers are included on the integrator circuit.It is capable of driving LEDs with a voltage of 850μA as the input voltage to this integrating circuit.If the input current exceeds 35mA, this can transceiver could malfunction.
ADM3315EARUZ Features
Tube package
24 pin count
24 pins
ADM3315EARUZ Applications
There are a lot of Analog Devices Inc. ADM3315EARUZ Drivers/Receivers/Transceivers applications.
- Wireless communication
- Car radio
- SONET/SDH Network
- Mainframes, workstations or storage devices
- Precision geodetic measurement
- Wireless multimedia center in smart home
- Satellite ground stations
- Broadcast application
- Fiber-to-the-desktop
- Cable network front end
