ADM3488ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM3488 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Interface | RS-422, RS-485 |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 2.2mA |
| Max Supply Current | 2.2mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| ESD Protection | No |
| Simplex/Duplex | Full Duplex |
| Output Low Current-Max | 0.0025A |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM3488ARZ Overview
The enhanced 8-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.The package of this receiver is Tube.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.A Surface Mount-type PCB or development board can be used to place this wide receiver.With respect to the power supply, this differential driver uses 3V~3.6V.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.This part number ADM3488 can be used to search for more variants based on the product type, temperature, package, etc.An enhanced power dissipation driver IC with 8 pins.There is a capability of 1-bit resolution with this ic receiver.As a general rule, this receiver has a resolution of 1 bits that is usually specified.There is a voltage input supply of 3.3V required for the operation of this integrated circuit.Line Driver or Receivers is a subcategory of this rf transceiver module.It implements 1 transceivers in total.This integrating circuit is able to drive LEDs with an input voltage of 2.2mA.When the input current reaches or exceeds 2.2mA, this can transceiver could have mal-functions.
ADM3488ARZ Features
Tube package
8 pin count
8 pins
ADM3488ARZ Applications
There are a lot of Analog Devices Inc. ADM3488ARZ Drivers/Receivers/Transceivers applications.
- Indoor ad hoc meeting
- High-speed computer links
- Wireless teaching
- TV signal transmission
- Car radio
- Telecom applications
- Routers
- Shortwave receiver
- Single fiber bidirectional application
- Ethernet circuitry
