ADM691AARWZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM691 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 762mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM691AARWZ Overview
A total of 16 terminals are used to mount this power management. A Tube package is used to package the power management. For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of 16-SOIC (0.295, 7.50mm Width) functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 4.75V volt supply. The power management is mounted by Surface Mount. In total, IC powers are 16 pins on the board. 16 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 0V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain, Push-Pull. Supplied with a operating current of 100μA, this PMIC is capable of fully function as specified. It is always advisable to use ADM691, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 100μA. The power management has 1 monitored inputs.
ADM691AARWZ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
ADM691AARWZ Applications
There are a lot of Analog Devices Inc. ADM691AARWZ Voltage Supervisors applications.
- Display equipment
- Automotive power systems
- Solar power charger
- Smartphones
- Automotive permanent magnet synchronous motors
- Embedded computing
- DC stabilized power supply module
- Transformer load monitoring equipment
- Battery cars
- Dash board
