ADM8691ANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | ADM8691 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Power Dissipation | 600mW |
| Max Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.73V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.73V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 70 ms |
| Height Seated (Max) | 5.33mm |
| Length | 20.07mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM8691ANZ Overview
There are 16 terminals on this power management that allow it to be mounted. It is packaged with Tube. Please find attached 1 functions for your reference in this IC power. Power management consists of 2 channels, each of which can be used independently. Please refer to power management for 16-DIP (0.300, 7.62mm) functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. The package peak reflow temperature is specified to be NOT APPLICABLE. When a supply voltage of 5V is applied to the power ic, it conducts. Through Hole mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 16 pins that are attached to IC management. 16 pins are on the supervisor. It is recommended that Vsup should not be less than 4.75V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Through Hole mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Push-Pull. The power management's supply current is 200μA. You can always use ADM8691, the base supervisor number, to search for similar PMICs of the manufacturer. There is a requirement for 5V power to power this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 200μA. The power management monitors 1 inputs at once.
ADM8691ANZ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
200μA operating supply current
ADM8691ANZ Applications
There are a lot of Analog Devices Inc. ADM8691ANZ Voltage Supervisors applications.
- Computer applications
- Functional modules
- Satellite navigation
- Multi-voltage system
- Stable power system
- Microcontroller system
- Embedded computing
- Digitally controlled LDO regulators circuit
- Electrical fire monitoring system
- Urban rail transit weak current power monitoring
