ADP3110AKCPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.6V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADP3110A |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 35V |
| Max Output Current | 1A |
| Nominal Supply Current | 5mA |
| Output Current | 700μA |
| Max Supply Current | 5mA |
| Propagation Delay | 65 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 65 ns |
| Halogen Free | Halogen Free |
| Rise Time | 55ns |
| Fall Time (Typ) | 45 ns |
| Rise / Fall Time (Typ) | 20ns 11ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.04 µs |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.07 µs |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADP3110AKCPZ-RL Overview
Its 8-VFDFN Exposed Pad package is adopted for higher flexibility.A package of Tape & Reel (TR) has been used.This device is equipped with 2 drivers for its configuration.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a 4.6V~13.2V supply voltage, it can demonstrate its superiority.The gate type on this device is N-Channel MOSFET.In this device, temperatures must not exceed 0°C~150°C TJ.This program uses the input type of Inverting, Non-Inverting.The configuration starts with 8 terminations.Numerous related parts are available for its base part number ADP3110A.Mounting the device requires Surface Mount.The pins are configured with 8 when designing the chip.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.An output current as high as 1A can be achieved at maximum power.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.On the board, there are 8 component pins.Mosfet driver supports an output current of 700μA.As a precaution, make sure the supply current is kept at 5mA.Mosfet gate drivers outputs 35V as voltage.
ADP3110AKCPZ-RL Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
ADP3110AKCPZ-RL Applications
There are a lot of ON Semiconductor ADP3110AKCPZ-RL gate drivers applications.
- High-speed communications
- High-voltage isolated DC-DC converters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Head-up and Head mounted displays
- Motor controllers
- Motor Control
- Industrial Motor Inverter - Power Tools, Robotics
- Topologies
- Isolated Supplies for controller area network (CAN),
- Commercial and agricultural vehicles (CAV)
