ADP8863ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP8863 |
| Pin Count | 20 |
| Number of Outputs | 7 |
| Qualification Status | Not Qualified |
| Max Output Current | 30mA |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Output Current | 240mA |
| Voltage - Output | 4.3V~5.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 60mA |
| Current - Output / Channel | 30mA 60mA |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | I2C |
| Number of Segments | 7 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP8863ACPZ-R7 Overview
There is also a 20-WFQFN Exposed Pad, CSP package that is used to save space on the board. LED drivers have a total of 7 outputs that are used in the design of the drivers.It is mounted using Surface Mount.DC DC Regulator emerges with high efficiency and reliability.If the led driver ic is set to -40°C~85°C TA, it will work normally.Backlight has many benefits.In this case, there are 20 terminations.It is configured with 20 pins as its base.It is estimated that there are 7 segments.Surface Mount has been mounted with the device.The LED driver is based on part number ADP8863.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.A voltage output of 4.3V~5.5V is provided by this device.There are 20 pins on it.Further, its characteristics allow it to be classified as Display Drivers.It operates with the minimal input voltage of 2.5V.In terms of supply current, there is a maximum value of 5.5V.There is no current that can be supplied to the load.When the switching frequency is maintained at 1MHz, this electronic component is able to fully play its functions.Even when operating at a maximal output current of 30mA, it is capable of delivering all the benefits of a LED driver.
ADP8863ACPZ-R7 Features
Available in the 20-WFQFN Exposed Pad, CSP package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1MHz
ADP8863ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADP8863ACPZ-R7 LED Driver ICs applications.
- A- lamps
- Constant Voltage Power Source for portable equipment
- Stage and Studio lighting
- Flicker-free LED Lighting using R1580N
- Other Electronic Devices
- Down lights
- Stage Lighting and Signage
- Scanners and Handy Terminals
- General lighting
- Dimmable LED for vehicle interiors
