ADS7950SDBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 30 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | microPOWER™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADS7950 |
| Pin Count | 30 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Configuration | MUX-S/H-ADC |
| Number of Channels | 4 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 2.3mA |
| Power Dissipation | 14.5mW |
| Number of Bits | 12 |
| Input Type | Single Ended |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Analog, Digital, Single |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 1.5 B |
| Sampling Rate | 1 Msps |
| Voltage - Supply, Analog | 2.7V~5.25V |
| Voltage - Supply, Digital | 1.7V~5.25V |
| Number of Analog In Channels | 4 |
| Sampling Rate (Per Second) | 1M |
| Output Bit Code | BINARY |
| Power Consumption | 11.5mW |
| Linearity Error-Max (EL) | 0.0366% |
| Integral Nonlinearity (INL) | 1.5 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Number of A/D Converters | 1 |
| Conversion Rate | 1 Msps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 5.02V |
| Output Format | SERIAL |
| Signal to Noise Ratio (SNR) | 71.7 dB |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADS7950SDBT Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 30-TFSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 30 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 4 channels.The is equipped with 30 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 1M Hz.The input type of this electronic AD converter is Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 30 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.25V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADS7950 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Depending on the supply type, analogue to digital converters can be categorized by Analog, Digital, Single.The supply/digital voltage of this electrical AD converter is 1.7V~5.25V.Surface Mount is a device that can be mounted on the digital converter.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 2.7V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 3.3V.The maximal analog input voltage of this electrical AD converter is 5.02V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 14.5mW.The number of channels is growing strong/weak: 4.The conversion rate of this electrical AD converter is calculated as 1 Msps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The ADC converter consists of 1 elements.It is a type of FPGA belonging to the microPOWER? series.
ADS7950SDBT Features
1 Functions
30 basic kinds of terminations
30 pin count
Minimal supply voltage of 2.7V
1 elements
microPOWER? series
ADS7950SDBT Applications
There are a lot of Texas Instruments ADS7950SDBT ADC applications.
- Audio/Video devices
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- RADAR processing, digital oscilloscopes
- Micro and pico cell systems, software radios
- Microcontrollers.
- Wireless and wired broadband communications
- Scientific instruments
- Medical Instrumentation and medical imaging
- Communications
- Smart antenna systems
