ADS8319IBDRCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | microPOWER™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 22.5mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADS8319 |
| Pin Count | 10 |
| Polarity | Unipolar |
| Power Supplies | 3.35V |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 3.6mA |
| Power Dissipation | 18mW |
| Number of Bits | 16 |
| Input Type | Pseudo-Differential, Single Ended |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Analog, Digital, Single |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 2 B |
| Sampling Rate | 500 ksps |
| Voltage - Supply, Analog | 5V |
| Voltage - Supply, Digital | 2.375V~5.5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 500k |
| Output Bit Code | BINARY |
| Power Consumption | 18mW |
| Linearity Error-Max (EL) | 0.0023% |
| Integral Nonlinearity (INL) | 1.5 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Conversion Rate | 500 ksps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 4V |
| Output Format | SERIAL |
| Signal to Noise Ratio (SNR) | 93.9 dB |
| Differential Nonlinearity | 1 LSB |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADS8319IBDRCT Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 10-VFDFN Exposed Pad package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 500k Hz.The input type of this electronic AD converter is Pseudo-Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADS8319 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply, categorized by Analog, Digital, Single.The supply/digital voltage of this electrical AD converter is 2.375V~5.5V.Surface Mount is a device that can be mounted on the digital converter.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 4.5V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.The maximal analog input voltage of this electrical AD converter is 4V.The ADC converter operates from 3.35V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 18mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 22.5mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 500 ksps.It is a type of FPGA belonging to the microPOWER? series.
ADS8319IBDRCT Features
1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 4.5V
3.35V power supplies
microPOWER? series
ADS8319IBDRCT Applications
There are a lot of Texas Instruments ADS8319IBDRCT ADC applications.
- Medical Instrumentation and medical imaging
- Scientific instruments.
- Industrial Process Control
- High Speed Data Acquisition for PCs
- Automotive
- Smart antenna systems
- Communications
- TD-SCDMA, WiMAX
- Wireless and wired broadband communications
- Music recording
