ADSP-21479KCPZ-1A
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 88 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 266MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21479 |
| Pin Count | 88 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Interface | DAI, DPI, EBI/EMI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 5MB |
| Number of I/O | 16 |
| RAM Size | 640kB |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Address Bus Width | 24 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Non-Volatile Memory | ROM (4Mbit) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 5Mbit |
| Clock Rate | 200MHz |
| Height Seated (Max) | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | CONTACT ADI (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 88-VFQFN Exposed Pad, CSP |
| Number of Pins | 88 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
ADSP-21479KCPZ-1A Overview
It is a kind of electronic component available in the 88-VFQFN Exposed Pad, CSP package.Packaging method Tray is provided.As a member of Floating Point, it is ideally suitable for a wide range of applications.There is a mounting point for it along the direction of Surface Mount.If it is operating at the temperature of 0°C~70°C TA, then it will be operating normally.As the name implies, the analog voltage range of 3.30V refers to the voltage that can be inserted or removed.The SHARC? series includes this digital signal processor.88 terminations are available for its use.The supply voltage is 1.2V.Pins are available for 88 components.There are 88 pins in its configuration.Based on its base part number of ADSP-21479, many ralated parts can be found.The device operates at the frequency of 266MHz in accordance with a specific design.The mounting method is Surface Mount.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.The minimum voltage supplied to this device is as low as 1.14V.A maximum voltage of 1.26V can be provided to this device.1.2V is the supply voltage for this device.Its memory can store 5MB data.Data formats and transmission speeds are configurable for 1 UART channels used for asynchronous serial communication.Counting external events and measuring time are done by 2 timers/counters.SHARC architecture is used for this processor core.There are 16 inputs and outputs on the device.
ADSP-21479KCPZ-1A Features
Supplied in the 88-VFQFN Exposed Pad, CSP package
Operating supply voltage of 1.2V
2 timers/counters
16 I/Os
ADSP-21479KCPZ-1A Applications
There are a lot of Analog Devices Inc. ADSP-21479KCPZ-1A DSP applications.
- Electronic information engineering
- Digital image processing
- Sonar
- Digital camera
- Geophysical processing
- Digital image processing, data compression
- Image compression
- Digital communications
- Statistical signal processing
- Radio detection and rangin systems
