ADSP-2181BS-133
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 128 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | 33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Frequency | 33.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| RAM Size | 80kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 100mA |
| Bit Size | 16 |
| Frequency (Max) | 33.3MHz |
| Data Bus Width | 16b |
| Address Bus Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 16000 |
| Number of Serial I/Os | 2 |
| Number of Timers | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 2 |
| Capacitance - Input | 8pF |
| Height Seated (Max) | 4.07mm |
| Length | 28mm |
| RoHS Status | Non-RoHS Compliant |
ADSP-2181BS-133 Overview
It is a type of electronic component available in package PQFP.It has a packaging style of Bulk.For its use, it has 128 terminations.It works with a voltage of 5V as a supply voltage.128 components have pins.128 pins can be found in its configuration.The device is specifically designed to operate at the frequency of 33.3MHz.The mounting method of the device is Surface Mount.The device can be classified as part of the Digital Signal Processors subcategory based on its specific characteristics.This device can be powered by voltages as low as 4.5V.The maximum voltage for this device is 5.5V.5V is the supply voltage for this device.Electricity is provided by 5V.This electronic part can also provide additional features to 33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION.The uPs/uCs/peripheral ICs of the device employ the DIGITAL SIGNAL PROCESSOR, OTHER type.The operating temperature should be lower than 85°C.-40°C should be exceeded as the operating temperature.In industrial settings, 1 timers provide accurate feedback and event activation.A source external to the system causes 4 interrupts.Its frequency should not exceed 33.3MHz.In order to transfer data without overloading the CPU, 2 DMA channels are used.2 serial I/Os are used for communicating data between devices.
ADSP-2181BS-133 Features
Supplied in the PQFP package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
ADSP-2181BS-133 Applications
There are a lot of Analog Devices, Inc. ADSP-2181BS-133 DSP applications.
- Streaming music
- Radio detection and rangin systems
- Automobiles
- Biomedical treatment
- Statistical signal processing
- Compression of videos
- Infinite impulse response filters
- Digital communications
- Remote sensing image processing technology
- Speech processing and recognition
